Introduction

• As you prepare to begin building your new Summit Powered Parachute there are some helpful tips we would like to pass on to you when using this manual. This manual is designed in such a way that the each step is a sequence and it is suggested that is followed. Read through the step completely before beginning the step assembly as there may be information part way through the step that will pertain to your particular assembly that may require you to look at instructions in a step further in the manual. These notations are usually in BOLD print.

• PARTS LIST CODES: The part numbers are listed at the beginning of each step. The parts in the kit are also labeled. All colored parts are coded with a BE for BLUE , BK for BLACK, and GD for GOLD. When you look at the Part number in the construction manual you will notice that the color code letter has been left out of the Part Number. This is done so that the same Construction Manual can be used for all colors. The Part Number identity is followed by the description of the part.

EXAMPLE: As it would appear on the colored part.

SBE2-13R [Engine Mount Brace (Blue)]

R = Rotax H= HKS HR = HKS or Rotax

HT = Hirth Z= Zanzoterra

EXAMPLE: As it will appear in the Construction Manual

• The Diagrams provided follow the description of the Step. It is a good practice to study the diagram after completely reading the step instructions so that you know what it should look like as you work directly on you airframe.